Handmade Wall Panels

You can have a glance at these panels and they can be used for various projects and can be used as photo frames,wall pieces,wall clocks.

The flowers are made up of normal white card sheets and photo inks for colouring of the petals.

I have also added few die cutouts in the background to enhance its beauty.

They can also be used as key holders to by sticking the piece on piece of mdf and by putting few nails too.

Shaker Envelopes

 

These envelopes can be used for gifting purpose adds more elegance to the ocassion.

For making these cute envelopes we have an online video tutorial available.

For joining these workshops and for more details you can fill in the form on the left side of the page.
Or you can contact us through facebook or instagram.

www.facebook.com\poohpapercraft
www.instagram.com\poohpapercraft

Pooh Paper Craft: Decoupage Box

Pooh Paper Craft: Decoupage Box: For the Decoupage Box we need wooden box chalk paints white paint decoupage tissue decoupage glue decoupage varnish flat brush spo...

Decoupage Box

For the Decoupage Box we need

1. wooden box
2. chalk paints
3. white paint
4. decoupage tissue
5. decoupage glue
6. decoupage varnish
7. flat brush
8. sponge
9. stencil 

lets get started 

first take the box , sponge and white paint, we will colour the box white,dab the sponge on the whole box in white colour. let the colour dry.

In the meanwhile when the colour is getting dry take the decoupage tissue and cut it according to the size of the  box. You can stick the paper on the top of the box and also on the sides of the box its your choice.

So now we are ready with the box and the decoupage paper.

Next step would be to take the glue and a brush, take the measurement of the box and the tissue and apply single coat of the glue on the box and then the tissue, when you place the tissue make sure that there are no crease on the tissue if there are any take a wet sponge and dab it on the tissue make sure that the sponge is clean.

Once you have put the tissue on the top of the box, do the same steps and stick the tissue on the sides of the box too. If you donot want to put a tissue on the sides than i will explain you an alternative for the same in the next step.

Now we will take a clean brush and varnish and apply a thin coat of varnish on the tissue. And let it dry.

In the next step we need one chalk paint, please choose a colour which suits with the colour of your tissue. 

take a sponge and the chalk paint which you have chosen in a plate and dip the sponge in the paint and dab it again on a plain sheet and then start colouring on all the empty spaces make sure there is no white colour visible.

If you have not stick the tissue on the sides then take a stencil in any design you like. Take a darker shade of colour then you applied on the base. Place the stencil on the sides and dab the colour with a sponge make sure you remove the extra colour and than dab the sponge. Let the colour dry.

When the colour is dry. Put one coat of varnish on the whole box.

And Finally your box will be ready.

Ps: i have used chalk paints because they have a creamy texture and are non sticky.

Handmade Wallclock with Dry clay

materials used

1. mdf cut out of round shape of the clock or round mdf then a separate clock 
2. dry clay
3. plastic roller
4. chalk paints 2 colours of same shades or all different shades
5. paint brush
6. glue
7. craft stamps 2 to 3 designs
8. chip board
9. pearl colour or shimmer colour
10. black gesso
11. stencil

Lets Start Making :-

If you do not get the clock mdf as shown in the picture than you can you a round base of  mdf whichever size you want and choose the dial of  the clock accordingly.

Next Step is you need to cut the chipboard into the shape given in the picture of the clock, you can see the colourful designs on the clock that is the shape you have to cut take the measurements and cut accordingly.

Step 1: take the dry clay and roll it with the roller it should not be too thick and too thin.

and take the the pieces of mdf or chip board whichever u have and put the clay on it. first apply some glue so that it sticks well . Do the same on all the pieces you have.

Step 2: take the craft stamps which ever design you want to put on the clock and start stamping it on the clay do it fast so that the clay does not dry. You can use the same design for the whole clock or you can use 2 designs by putting them alternate to each other.

Step 3: take the chalk paints and paint brush. You can use multi-colours or just 2 colours apply the colour with the brush you can give according to your choice. paint it accordingly and give shading too. Let it dry.

Step 4: While the pieces are drying. You can colour the base for the clock. use the black gesso for the base.Cover the whole base and let it dry.

Step 5: once the pieces are dry take the shinning colour. And apply it with your fingers just in some places on all the pieces,use the same shinning colour on the dail of the clock 

Step 6: once your base is dry, take the stencil and a dry sponge and white colour, take some colour on the sponge remove the extra colour on the side and dab it on the centre with the stencil, you can use the extra colour you removed so that you do not waste the colour.  make sure you cover the centre part and the place till where you dail comes.

Step 7: Once you are ready with all the pieces the last step is to stick them with glue,Stick them according to your preference. And your clock is ready put the clock machine and its ready to use.
Put picture varnish for more durability its not compulsory.

How to make Decoupage Bottle?

List of Materials Required

1.  glass bottle any size
2. thick white thread (optional)
3. white acrylic colour
4. decoupage glue
5. decoupage varnish
6. decoupage tissue
7. handmade or ready flowers
8. other decorative materials
9. hot glue gun 
10. paint brushes

Note:-

• Make sure you remove the stickers from the bottle. 
• Keep the bottle in a bucket of water for sometime so that the sticker can be removed easily
• If you are wrapping thread then you need not remove the stickers

The Making:-

Step 1:

If you are using the thick white thread-

then you should start wrapping it from the mouth of the bottle make sure you remove the cap. And use glue in the start or you can use hot glue gun too. Then go on wrapping the bottle with the thread in between go on applying some glue and go on wrapping it on the bottle till the end.

If you are not using thread-  

take white paint and a sponge and start dabbing the colour and cover the whole bottle with white paint. let it dry.

Step 2:

Now take decoupage glue and tissue, cut the tissue according to the size of the bottle, once you are done with the cutting take a brush and take some decoupage glue and start applying it on the bottle , put the decoupage glue on some part of the bottle and then carefully and slowly apply the tissue.Make sure there are no crease of the tissue then apply glue on the rest of the bottle and then dab it with a sponge and remove any crease if you have any left. Let it dry.

Step 3:
Now take a clean brush and decoupage varnish and apply it on the whole bottle, and then let it dry.

Step 4:
After the varnish is dry, Take all the decorative material you have and keep the hot glue gun for heating and decorate the bottle as per your choice. I have shown some samples also for reference.

You can also put fairy lights if you have them and you wish to put them.

Dream Catcher

Dream Catcher is said to be scared and is used for protection of babies in us
They can also be hung on your bedroom windows it is said that it takes away all the bad dreams
The typical dream catcher has feathers and it is a kind of a spider web.

This is the typical dream catcher made by me.

Now, here i have given this dream catcher a twist in a new design along with all the web design and feathers too.

I have used foam flowers, ready made mullberry flowers,leaves, few metal emblishments , laces, pearls, beads, tear drop crystal, sentiments in mdf, laces and many more things. 

Give this a try make your version of dream catcher and you can post it on comments also tag us on facebook wall, you can also tag us on your instagram story too.

www.facebook.com/poohpapercraft

www.instagram.com/poohpaercraft

Waiting for your responses

And you are new to crafting we also conduct online workshops do contact us for more information.

How to make nameplate at home or a DIY of nameplate

List of material needed

 1.brown ply of any size you need

 2.texture paste (you can DIY this also)

 3.stencils

 4.mdf or any kind of pieces you want to put on the nameplate

 5.black paint (chalk paint preferable or acrylic paint)

 6.choose one more shade of paint

 7.golden pearl colour or copper pearl colour

 8.hot glue gun

 9.palette knife or butter knife

10.paint brush or a sponge 

11.cut out of name can be any in mdf  or paper cuttings also

Let’s start to make the nameplate

Firstly make sure the base that you are taking for the nameplate is clean if not then colour the base in white colour.

Step 1: take the stencil you have chosen for the nameplate and palette knife and the texture paste place the stencil on the ply wherever you want to put the design it is mostly preferred on the edges of the ply let it dry. You can also put 2 to 3 designs together if it comes in sync.

Step 2: once the texture paste is dry take black colour with a sponge or brush and colour the whole plate in black make sure there is no space left. Let it dry. You can choose any other colour you like as the base but it should be in proper match and it should suit your work you are doing. Try using some dark shade and pastels they go well. Try some chalk paint as well they work on all surface. They do not peel of like acrylic they are non-sticky as well.

Step 3: After the black colour is dry take a dry brush and the second colour which you have chosen, dip the brush in the colour take of the excess colour on a plastic so that you can reuse the same colour now put the colour with the dry brush on some spots not the whole surface.

Step 4 :take the golden or silver or copper colour on your finger and put them on few designs of the texture not the whole part this is just to make the nameplate glow and the designs to be visible.

Step 5: take the pieces of mdf or the other articles you want to put on the nameplate and colour them black you can also keep the few pieces as it is and colour the rest in black first after the black is dry now take the dry brush which you took of the second colour and do the dry brushing on the articles not the whole articles but the few spots, you can also put the golden colour with your finger let the pieces dry.

Step 6: Now colour the alphabets in golden colour and then let it dry. Make sure that you choose the appropriate size of the name according to your ply.

Step 7: We are ready for the final placement of the nameplate. Take your glue gun and start placing the things and parts of the nameplate into places. You can refer to the image while assembling the parts of the nameplate.