Handmade Wallclock with Dry clay

materials used

1. mdf cut out of round shape of the clock or round mdf then a separate clock 
2. dry clay
3. plastic roller
4. chalk paints 2 colours of same shades or all different shades
5. paint brush
6. glue
7. craft stamps 2 to 3 designs
8. chip board
9. pearl colour or shimmer colour
10. black gesso
11. stencil

Lets Start Making :-

If you do not get the clock mdf as shown in the picture than you can you a round base of  mdf whichever size you want and choose the dial of  the clock accordingly.

Next Step is you need to cut the chipboard into the shape given in the picture of the clock, you can see the colourful designs on the clock that is the shape you have to cut take the measurements and cut accordingly.

Step 1: take the dry clay and roll it with the roller it should not be too thick and too thin.

and take the the pieces of mdf or chip board whichever u have and put the clay on it. first apply some glue so that it sticks well . Do the same on all the pieces you have.

Step 2: take the craft stamps which ever design you want to put on the clock and start stamping it on the clay do it fast so that the clay does not dry. You can use the same design for the whole clock or you can use 2 designs by putting them alternate to each other.

Step 3: take the chalk paints and paint brush. You can use multi-colours or just 2 colours apply the colour with the brush you can give according to your choice. paint it accordingly and give shading too. Let it dry.

Step 4: While the pieces are drying. You can colour the base for the clock. use the black gesso for the base.Cover the whole base and let it dry.

Step 5: once the pieces are dry take the shinning colour. And apply it with your fingers just in some places on all the pieces,use the same shinning colour on the dail of the clock 

Step 6: once your base is dry, take the stencil and a dry sponge and white colour, take some colour on the sponge remove the extra colour on the side and dab it on the centre with the stencil, you can use the extra colour you removed so that you do not waste the colour.  make sure you cover the centre part and the place till where you dail comes.

Step 7: Once you are ready with all the pieces the last step is to stick them with glue,Stick them according to your preference. And your clock is ready put the clock machine and its ready to use.
Put picture varnish for more durability its not compulsory.